Interesting boats for sale

7 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Ramona
Ramona
NSW
7752 posts
NSW, 7752 posts
9 Apr 2020 8:16am


Looks wrong with the gaff rig. Should be cat rigged. Here is a bigger version at Rhode Island.



SRrat
SRrat
WA
240 posts
WA, 240 posts
11 Apr 2020 6:33am
Ramona said..




Looks wrong with the gaff rig. Should be cat rigged. Here is a bigger version at Rhode Island.




I agree does look a little odd with the gaff rig. Possibly a compromise to get under the bridges just down river.
r13
r13
NSW
1720 posts
r13 r13
NSW, 1720 posts
11 Apr 2020 9:33am
For this yacht does anyone know;

1 Designer - Peterson designed the Blazer 23 but this 31 I am not sure if he did or the builder Glass Yachts Qld designed it "in house"
2 How many were built
3 Any issues with hull or rig - this one has a new 15hp outboatd plus 10hp saildrive so the latter must have been inadequate
4 I would question the 3t displacement - suggest somewhere closer to 2t would be closer
5 The draft with centreboard raised would not be 0.6m as it has the bulb depth as well as hull depth - so around 1m probably

yachthub.com/list/yachts-for-sale/used/sail-monohulls/blazer-31/235476

Video of one on Lake Mac a while back



One sails out of RYCV (50 / 50) and is in Div1. Has beaten Northshore 38s on scratch in some races - albeit they are a tad tippy.

thanks in advance.
All@Sea
All@Sea
TAS
233 posts
TAS, 233 posts
11 Apr 2020 10:45am
There was one in Tasmania for quite a while, I seem to recall it did the 3 Peaks race more than once, though the Three Peaks web site doesn't seem to be operating these days to check.
stray
stray
SA
325 posts
SA, 325 posts
11 Apr 2020 10:57am
r13 said..
For this yacht does anyone know;

1 Designer - Peterson designed the Blazer 23 but this 31 I am not sure if he did or the builder Glass Yachts Qld designed it "in house"
2 How many were built
3 Any issues with hull or rig - this one has a new 15hp outboatd plus 10hp saildrive so the latter must have been inadequate
4 I would question the 3t displacement - suggest somewhere closer to 2t would be closer
5 The draft with centreboard raised would not be 0.6m as it has the bulb depth as well as hull depth - so around 1m probably

yachthub.com/list/yachts-for-sale/used/sail-monohulls/blazer-31/235476

Video of one on Lake Mac a while back



One sails out of RYCV (50 / 50) and is in Div1. Has beaten Northshore 38s on scratch in some races - albeit they are a tad tippy.

thanks in advance.


Designer Rob White. It says in the add.
r13
r13
NSW
1720 posts
r13 r13
NSW, 1720 posts
11 Apr 2020 1:34pm
Thanks for responses, sorry I missed the designer in the advert. I see Rob retired in 2017 after 30yrs as a sailmaker - good effort.

southportyachtclub.com.au/websitefiles/iNSYnC/2017/Southport%20Yacht%20Club%20iN%20SYnC%20Spring%202017%20WEBSIZED.pdf
Ramona
Ramona
NSW
7752 posts
NSW, 7752 posts
11 Apr 2020 5:58pm
This Farr has just been reduced to 20 grand. Lot of boat for the money! Started for sale at 36 grand.

www.gumtree.com.au/s-ad/cervantes/sail-boats/36ft-farr-yacht-new-sails-and-rigging/1239923054
Ramona
Ramona
NSW
7752 posts
NSW, 7752 posts
14 Apr 2020 5:56pm
Well known classic. Interesting how the load is shared for the chainplates.

yachthub.com/list/yachts-for-sale/used/sail-monohulls/custom/246770
cisco
cisco
QLD
12365 posts
QLD, 12365 posts
15 Apr 2020 1:31am
Ramona said..
This Farr has just been reduced to 20 grand. Lot of boat for the money! Started for sale at 36 grand.

www.gumtree.com.au/s-ad/cervantes/sail-boats/36ft-farr-yacht-new-sails-and-rigging/1239923054


I wouldn't want to have rowed out to that one and discover I had left the keys in the car.
Kinora
Kinora
VIC
192 posts
VIC, 192 posts
15 Apr 2020 8:36am
Is this "the" Berrimilla II?
www.gumtree.com.au/s-ad/launceston/sail-boats/brolga33/1244255078
r13
r13
NSW
1720 posts
r13 r13
NSW, 1720 posts
15 Apr 2020 12:17pm
Assume so. What a history.

en.wikipedia.org/wiki/Berrimilla_II
r13
r13
NSW
1720 posts
r13 r13
NSW, 1720 posts
15 Apr 2020 9:12pm
Cripes if this isn't the best Southerly 23 advert I've ever seen will eat a carrot................I have nothing to do with the yacht, have never seen it...

www.boatsales.com.au/boats/details/1970-compass-southerly-24/SSE-AD-6616190/?Cr=5
Ramona
Ramona
NSW
7752 posts
NSW, 7752 posts
21 Apr 2020 8:43am
Local yacht. Built in Britain. This boat has circumnavigated. Nice interior. Topsides are good but the cabin top needs finishing. The deck is a mess. Some rot under the cockpit but an easy repair. Wooden mast and gal rigging. Good mooring that is only a couple of years old.

www.gumtree.com.au/s-ad/nowra/sail-boats/free-timber-yacht-and-mooring/1246152505
Ramona
Ramona
NSW
7752 posts
NSW, 7752 posts
22 Apr 2020 8:20am
Ramona said..
Local yacht. Built in Britain. This boat has circumnavigated. Nice interior. Topsides are good but the cabin top needs finishing. The deck is a mess. Some rot under the cockpit but an easy repair. Wooden mast and gal rigging. Good mooring that is only a couple of years old.

www.gumtree.com.au/s-ad/nowra/sail-boats/free-timber-yacht-and-mooring/1246152505


Well, that went faster than I expected. I guess I will run into the new owner today or very soon. Someone had a real win.
Perry500
Perry500
NSW
66 posts
NSW, 66 posts
22 Apr 2020 9:11am
LooseChange said..

2bish said..
RM Yachts are interesting sail boats (there you go Loosechange :).Epoxy impregnated ply construction hulls with epoxy sheathing. Light, stiff and strong. I like the concept, ply allows for big gains in stiffness for performance boats it seems.
Construction vid:


Review here are of one model:



Yes, I have liked the RM boats and French boats in general for a long time now, I find nothing wrong with ply or timber boats and in fact possibly prefer it to a lot of other material choices. But like all things it has to be designed for the chosen material and built accordingly.
It is a bit erroneous to call it epoxy impregnated ply construction because when using ply, saturation can only be achieved to the first glue line of the first veneer and bearing in mind that some first veneers can be as thin as 1.5mm that is not a lot of saturation.


Agree, once water is into end grain of ply, its hard to chase out , old days coach wood ply was the best I believe
Perry500
Perry500
NSW
66 posts
NSW, 66 posts
22 Apr 2020 5:17pm


Would have to be the best buy I have ever seen , great ride.
MuttonBird
MuttonBird
VIC
74 posts
VIC, 74 posts
25 Apr 2020 6:22pm
Here's one with the lot .. .. what a gem! Until I got to the exploder stove and the saildrive.

yachthub.com/list/yachts-for-sale/used/sail-monohulls/sparkman-stephens-defiance-30-stunning-vessel-in-immaculate-condition-throughout/247064
LooseChange
LooseChange
NSW
2140 posts
NSW, 2140 posts
25 Apr 2020 7:41pm
MuttonBird said..
Here's one with the lot .. .. what a gem! Until I got to the exploder stove and the saildrive.

yachthub.com/list/yachts-for-sale/used/sail-monohulls/sparkman-stephens-defiance-30-stunning-vessel-in-immaculate-condition-throughout/247064


That's being a bit melodramatic.
Think of the stove as an inducement to let your prowess shine by putting in place what you think is more suitable.
As for the saildrive, again all that need be done is put a decent folder on it, job done.
Now, you were saying?
gonadman
gonadman
NSW
29 posts
NSW, 29 posts
26 Apr 2020 7:40am
yachthub.com/list/yachts-for-sale/used/sail-monohulls/spacesailer-27/238907
Any thoughts for a first yacht purchase??
Ramona
Ramona
NSW
7752 posts
NSW, 7752 posts
26 Apr 2020 8:43am
MuttonBird said..
Here's one with the lot .. .. what a gem! Until I got to the exploder stove and the saildrive.

yachthub.com/list/yachts-for-sale/used/sail-monohulls/sparkman-stephens-defiance-30-stunning-vessel-in-immaculate-condition-throughout/247064


It's actually a very good ad. Those stoves were supposed to be illegal but they are still for sale everywhere. Saildrives are OK, they make you slip the boat more often. I like the interior fit out and layout. Has a tiller and an anchor locker. Good deck layout except for the dodger which ruins the ability to use the reefing winches. The mainsheet traveler needs to be across the cockpit so a decent purchase can be made for the mainsail.
LooseChange
LooseChange
NSW
2140 posts
NSW, 2140 posts
26 Apr 2020 10:49am
Ramona said..

MuttonBird said..
Here's one with the lot .. .. what a gem! Until I got to the exploder stove and the saildrive.

yachthub.com/list/yachts-for-sale/used/sail-monohulls/sparkman-stephens-defiance-30-stunning-vessel-in-immaculate-condition-throughout/247064



It's actually a very good ad. Those stoves were supposed to be illegal but they are still for sale everywhere. Saildrives are OK, they make you slip the boat more often. I like the interior fit out and layout. Has a tiller and an anchor locker. Good deck layout except for the dodger which ruins the ability to use the reefing winches. The mainsheet traveler needs to be across the cockpit so a decent purchase can be made for the mainsail.


The stoves were withdrawn from sale and they were later allowed to be placed on sale again so they are not illegal. The problem that got these stoves a bad rap was that people would put oversize pots and pans on them thereby allowing the gas cartridge to become overheated to the point of rupture. The stove in this boat has inadequate ventilation around it so could overheat the cartridge, plus I note it is a brand new looking stove that doesn't appear to have been used.
SandS
SandS
VIC
5904 posts
VIC, 5904 posts
26 Apr 2020 9:12pm
gonadman said..
yachthub.com/list/yachts-for-sale/used/sail-monohulls/spacesailer-27/238907
Any thoughts for a first yacht purchase??


looks the goods !
gonadman
gonadman
NSW
29 posts
NSW, 29 posts
27 Apr 2020 2:07pm
SandS said..

gonadman said..
yachthub.com/list/yachts-for-sale/used/sail-monohulls/spacesailer-27/238907
Any thoughts for a first yacht purchase??



looks the goods !


Brought it!
Mike367
Mike367
VIC
151 posts
VIC, 151 posts
27 Apr 2020 3:11pm
gonadman said..

SandS said..


gonadman said..
yachthub.com/list/yachts-for-sale/used/sail-monohulls/spacesailer-27/238907
Any thoughts for a first yacht purchase??




looks the goods !



Brought it!



Well done, its a nice looking boat. It's a pity I can't go boat hunting down here in Vic.
SandS
SandS
VIC
5904 posts
VIC, 5904 posts
27 Apr 2020 8:29pm
gonadman said..

SandS said..


gonadman said..
yachthub.com/list/yachts-for-sale/used/sail-monohulls/spacesailer-27/238907
Any thoughts for a first yacht purchase??




looks the goods !



Brought it!


good work , go sailing and enjoy , if legal where you are . the boat looks well cared for.
All@Sea
All@Sea
TAS
233 posts
TAS, 233 posts
28 Apr 2020 1:50am
I don't know the history of this one, there were a few EC31s that were a regular sight on the Derwent over the years, but I don't recall this one... still, I've always liked the look of them!
yachthub.com/list/yachts-for-sale/used/sail-monohulls/eastcoast-31-peter-cole-31/247063
Bundeenabuoy
Bundeenabuoy
NSW
1239 posts
NSW, 1239 posts
28 Apr 2020 6:21am
All@Sea said..
I don't know the history of this one, there were a few EC31s that were a regular sight on the Derwent over the years, but I don't recall this one... still, I've always liked the look of them!
yachthub.com/list/yachts-for-sale/used/sail-monohulls/eastcoast-31-peter-cole-31/247063


Looks good.
EC31
EC31
NSW
490 posts
NSW, 490 posts
28 Apr 2020 5:31pm
All@Sea said..
I don't know the history of this one, there were a few EC31s that were a regular sight on the Derwent over the years, but I don't recall this one... still, I've always liked the look of them!
yachthub.com/list/yachts-for-sale/used/sail-monohulls/eastcoast-31-peter-cole-31/247063


Looks a bargain!
cisco
cisco
QLD
12365 posts
QLD, 12365 posts
29 Apr 2020 12:03am
Good capable yacht for Bass Strait and west Tassie.
Ramona
Ramona
NSW
7752 posts
NSW, 7752 posts
29 Apr 2020 5:57pm
Nice Carter 33 with a tiller!

yachthub.com/list/yachts-for-sale/used/sail-monohulls/carter-33/247167

Be a better ad with some other interior photos.
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅