Recent
No recent locations yet.
Capital city
National / States

Malvern Rain Radar - 200km

Loading map
Use the icon for quick access to locations
National & State Rain Radars
Capital City Rain Radars

About the Malvern Rain Radar

Approximately 19 km west-south-west of Melbourne's Central Business District.

Geographical Situation The radar is situated on the western plains of the Melbourne basin some 19 km west-south-west of the Central Business District, about six kilometres from the western shores of Port Phillip bay and on a low rise about 20 m above mean sea level. The radar is on a tower 24 m above ground level. The Great Dividing Range dominates the topography from the east, through the north to the west. The most significant obstructions, starting from the east, are: Mt Dandenong 644 m high, 53 km to the east; Yarra ranges 1219 m, 83 km to ENE; Mt Macedon 1013 m, 56 km to the north; Pentland Hills 763 m and the Brisbane ranges 421m, 45 km from the NNW through to the west and the You Yangs 363 m, 30 km to the SW. Meteorological Aspects The radar is well sited to provide very good coverage for the Greater Melbourne Metropolitan Area. The high ground from the east, through north and to the south west tends to obscure shallow rain falling further away. Summer thunderstorms that develop on the surrounding hills and mountains may be observed in detail. Similarly, cold fronts and associated rain and thunderstorms approaching from the northwest, through west and south are well detected. The location on the floor of a wide basin is ideal for Doppler observations which provide wind speed information. Non-meteorological aspects In most cases the processing of the radar signal removes permanent echoes caused by obstructions such as hills, buildings and other solid objects rather than rainfall. Occasionally, some permanent echoes will not be completely removed from the display. These echoes usually occur along ridges and peaks as isolated, stationary patches, being most common near the Yarra Ranges to the ENE and Mount Macedon to the north. These usually become more noticeable on cold, clear, winter nights or early winter mornings. Because the radar has an unobstructed view of Port Phillip Bay out to about 25km, sea-clutter may be seen over the bay during strong winds. These echoes may be distinguished from rain as they do not move with the wind and end abruptly at the shoreline of the bay. Doppler observations are occasionally affected by multi path reflections off Melbourne City buildings and approaching rain bands. These appear as radials of incorrect Doppler velocities in the area to the northeast of the radar. Doppler observations can also reveal the presence of flocks of birds over Port Phillip Bay, which appear as thin lines, and generally have a higher velocity than the surrounding area. <a
Warnings
No warnings within 100 km.
State Wide
Temperature
Malvern
18 °C 19 °C 3pm 11 °C 1am
↓ Cooling
Now: 18 °C
Tides
St Kilda
4:51pm 0.55m 10:54pm 0.94m
↑ Rising
Current: 0.94m
Weather Now for Malvern
Partly cloudy.
18 °C
Feels like 15 °C
Wind
10 kn N
Humidity
69%
Pressure
1025 hPa
At Melbourne
Nearby Wind
50 km radius
N S W E 9 kn Scoresby 10 kn Essendon Airport 14 kn Laverton 14 kn Frankston 7 kn Coldstream
Malvern
10 kn N
Recent Locations
Malvern
10 kn N
18°
Pebbley Beach -
Drouin
6 kn NNE
17°
Cawongla
4 kn SW
16°
Banyo
5 kn S
17°
Ballogie
Calm
13°
Tintaldra
Calm
Sun
7:32am rise 5:07pm set
9 h 34 m of daylight
Now: 10:51pm
30 seconds less than yesterday
Moon
4:02am rise 2:25pm set
9% illuminated
Waning Crescent
Live Weather
Nearby
Melbourne, VIC
10 kn N
18°
St Kilda, VIC
20 kn NNE
Viewbank, VIC
2 kn NE
16°
Fawkner Beacon, VIC
19 kn N
Moorabbin Airport, VIC
17 kn N
18°
Scoresby, VIC
9 kn NNE
17°
Essendon Airport, VIC
10 kn NNE
17°
Laverton, VIC
14 kn N
17°
Windiest in Australia
Mount William, VIC
36 kn N
Most Windless in Australia
Perth (Coastal), WA
Calm
12°
Hottest in Australia
Cocos Island, WA
10 kn ESE
28°
Coldest in Australia
Perisher Valley, NSW
Calm
Wettest in Australia
Coondewanna, WA
15.6 mm
Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅