Recent
No recent locations yet.
Capital city
National / States

Madeley Rain Radar - 50km

Loading map
Use the icon for quick access to locations
National & State Rain Radars
Capital City Rain Radars

About the Madeley Rain Radar

Perth Airport (Yangedi Rd North, Hopelands)

This radar is located Perth Airport at a former wind-finding radar site, which is not an optimal location for weather watch operations. The radar beam is significantly obstructed to the north due to tall trees, and so rainfall may be underestimated or disappear completely where the beam is completely blocked north of the radar. Coverage to the east is impacted by Darling Scarp and rainfall may be underestimated on the eastern side of the range. Coverage to the south and west is generally reasonable with the exception of local obstructions due to nearby structures such as the airport control tower. <a
Warnings
No warnings within 100 km.
State Wide
Marine Agricultural
Temperature
Madeley
13 °C 15 °C 2pm 6 °C 11pm
↓ Cooling
Now: 13 °C
Tides
Hillarys
8:50am 1.44m 7:00pm 0.50m
↓ Falling
Current: 1.19m
Weather Now for Madeley
Shower or two.
13 °C
Wind
5 kn SSE
Humidity
86%
Pressure
1019 hPa
At Hillarys
Nearby Wind
50 km radius
N S W E 5 kn Millendon (Swan Valley) 7 kn Jandakot 16 kn Rottnest Island 7 kn Gingin Airport 14 kn Garden Island
Madeley
5 kn SSE
Recent Locations
Madeley
5 kn SSE
13°
Cannons Creek
2 kn N
17°
Low Rocky Point
13 kn N
12°
Coningham
2 kn N
12°
Miena
11 kn NNW
Aberfoyle -
Sun
7:15am rise 5:20pm set
10 h 4 m of daylight
Now: 12:20pm
16 seconds less than yesterday
Moon
7:25am rise 5:18pm set
0% illuminated
New Moon
Live Weather
Nearby
Millendon (Swan Valley), WA
5 kn SSE
13°
Swanbourne, WA
8 kn SSE
13°
Melville Water, WA
10 kn SSE
Perth Airport, WA
13 kn SSW
13°
Windiest in Australia
Mount Read, TAS
32 kn N
Most Windless in Australia
Frankston, VIC
Calm
Hottest in Australia
Noonamah, NT
7 kn ESE
33°
Coldest in Australia
Mount Wellington, TAS
23 kn WNW
Wettest in Australia
Coffs Harbour Airport, NSW
8.6 mm
Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅