Tuttle Box screws

Enable JavaScript to get the best experience.

Create new topic

Search Subscribed Active Create new topic

> 10 years ago

General Gps & Speed Waves Foiling Gear Reviews Lost & Found WA NSW QLD SA VIC TAS

easty

TAS

2213 posts

easty

TAS, 2213 posts

9 Oct 2010 9:44pm

Can anyone tell me what size (dia. length, thread) screws I need for a tuttle box fin (for '04 *board sonic).
Cheers

Hausey

NSW

325 posts

Hausey

NSW, 325 posts

9 Oct 2010 11:10pm

From memory 1/4 " SS pan heads..... length dependant on board thickness - put fin in box and stick something down the holes to measure and add a bit (10-20mm) for the thread to bite!

Mark _australia

23647 posts

Mark _australia

WA, 23647 posts

9 Oct 2010 11:10pm

If it is 1/4 it will be UNC thread (not UNF)

Do you have a WS shop anywhere who can measure one and then you can go to the fasteners shop and buy them? They are a standard pan head metal thread you can buy at any fixings place (except hardware stores) - no funny dia or thread involved

nebbian

6277 posts

nebbian

WA, 6277 posts

9 Oct 2010 11:36pm

My 07 Starboard iSonic uses 6mm x 30 mm metric pan head stainless steel.

I got 4 of every length from 10 mm to 75 mm, so now these sorts of problems don't happen any more

What sort of fin is it? All the fins I've tried use metric cross dowels.

Elmo might know more about whether metric or imperial is the go.

fullmoon

314 posts

fullmoon

WA, 314 posts

10 Oct 2010 1:16am

On the starboard website go to..Products..Product assistance..Fin Bolt Chart..2004..Sonic=M6-35+35.
All years,all boards.

easty

TAS

2213 posts

easty

TAS, 2213 posts

10 Oct 2010 8:35am

Thanks

Please Register, or first...

Topics Reply