Hi All,

Just looking for some help with this one... I was washing down my NP Fusion 5.5 yesterday and decided to remove the battens as there was a bit of sand through the battens... All was going well until I went to put the top batten back in, and it won't go in that last 1/2 inch that will allow the batten lock to fold over ?!

Does any one have any thoughts / experienced this before ?

Could just be catching on the end reinforcement stitching.
Have you tried with somebody helping to guide it at the luff end?

Just for those who might be interested, or who have a similar problem in the future...

Managed to get the batten to fit again. I must have pulled the adjusting piece away from the rod enough to make it slightly longer (keep it clean fella's!). Anyway, after a little tapping to get the adjusting piece back further down the batten, it fitted in.

Happy again, and ready for the weekend !