1008 posts
Getting a bit a wear on the mast from one of the cams, can I just paint on some epoxy now and then to protect it? Don't really won't to wrap it as it's not that bad yet and don't won't a bulge as the glass would be thicker then the dent.
NSW
1855 posts
I think epoxy only would crack and detach quickly, you can get very fine cloth that will add minimal thickness
QLD
3410 posts
Mast wear from cams aids rotation
QLD
1997 posts
Painting some resin on the wear points is fine. I don't have cammed sail but I do my my mast tips. Will prolong their life.
2833 posts
Any thoughts on using the same clearcoats the factories use? Is that polyurethane clearcoat?
QLD
87 posts
Just paint on a thin layer of epoxy resin. It works well for cam wear and mast tip. It doesn't crack or wear off easily.
1008 posts
Just painted on some epoxy, if that doesn't work I've got some carbon cloth I'll try next.
1349 posts
Check the cam too, maybe some grime got stuck on it.
Ezzy top cap puts sideways pressure on the mast, I rotate the mast to even out the wear but ultimately need to add a layer of cloth too.
WA
12872 posts
carbon doesn't wear well, you'd be better of with glass.
