QLD
6809 posts
Topic was possibly discussed already thousand times, so I will be grateful if you could point to the link.
How to repaid thread in the fin ?
Standard stainless steel bolt now is coming easy of the fin so I need to repair thread if possible.
Solution coming to my mind could be :
-filling the hole with epoxy and re-drilling the hole with smaller diameter drill bit. I hope that bolt could the cut new thread by itself.
or I need to cut the new thread ? Does anybody know better way to save the fin ?
WA
629 posts
Take a nut out of an old fin and retrofit to your fin. Drill the existing bolt hole out with 1mm clearance first
QLD
490 posts
ifits not the brass insert kind you could tap it and put a one of those steel thread recoil things in
QLD
370 posts
Hi Macro, Dieter at Sunshine Coast sells the brass fitting, pretty cheap :)
WA
12872 posts
Yep, if it's a barrel nut in there, just punch it out and put another one in. The only problem is they come in different diameters and with different threads, so you may have to do some adjustments. If there's no barrel nut, it's probably easier to fit one, I've tried epoxying and rethreading but it doesn't last very long, just drill the old thread out, and install new nut.
QLD
585 posts
Pete, just knock one out of a old fin base surely you have a old broken fin base lying around.
