Hi Everyone, I'm currently modifying a 12 year old F2 wave board by giving it a modern nose job. I needed some DivinyCell foam (high density PVC foam for Epoxy Sandwich construction) and because it was pretty hard to get my hands on had to buy a whole sheet (about 2m x 1m, 5mm strong), for about $120. Naturally I have heaps left and am happy to share for a very fair price. This stuff is needed for repairing boards where the first foam layer is cracked or for fitting plugz for foot straps, laminating in fin boxes or mast tracks. (see www.boardlady.com). If anyone is interested I will be able to cut pieces to size and post via mail (this stuff is very light). You can drop me an email on [email protected] or reply to this post.

The remaining size is about 2m x 1m with a corner of a little more than a size A4 paper cut off. I just got the whole sheet from a local Composite supplier as I was unable to buy smaller pieces for the nose modification job of my wave board. There are at least 3 kite boards sizes in it i would think.

jakranz said...

Hi Everyone, I'm currently modifying a 12 year old F2 wave board by giving it a modern nose job. I needed some DivinyCell foam (high density PVC foam for Epoxy Sandwich construction)

with out seeing any pic's im sure you didnt need the divicell, theres no load on the nose so just an extra couple of layers of glass would have done , have you got any pic's