SA
251 posts
Is it possible to fix a Cam that has broken in the mast sleeve the batten part has snapped off inside the grey plastic part that goes over it in a attempt at rigging. It was already broken when I got the sail which is on loan to me. The other half is broken off so now there is a small bit of batten sticking out in the mast sleeve where the cam normally goes. Is this possible to fix?
NSW
714 posts
Do you mean this?
http://www.neilpryde.com/store/19.html
Called a widget. Sam at Windsurfnsnow in Syd had a few before. I imagine your local NP dealer will have some. It is not uncommon for them to go.
Watch out, they do come in 2 sizes, make sure you get the right one.
When I broke one Sam replaced it for me in about 20 minutes.
JB
SA
251 posts
yeah I went down to my Local Windsurfing Shops in Adelaide. Thanks to Scott from Glasscraft even though they didn't have the part he was able to point me in the right Direction. Onboard managed to order 2 in from Melbourne so getting fixed this week and they doing it really cheap cheers Pete and I got a spare if it brakes again.
Cheers Pittsy
