Bottom edge sail repair with glued hose

5 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
MobZ
MobZ
NSW
534 posts
NSW, 534 posts
20 Oct 2020 8:33pm
Howdy. I am thinking to split a length of 6mm clear vinyl tube and glue it to the bottom edge of my old sailworks sail as all the rubber trim has obliterated itself and seems like stitching will wear quick now as I grind it over the board learning.
good idea?

old sail. Probably not worth spending money on I reckon. Other than some tube and glue. But I like the sail so I'd like to keep it going.
Imax1
Imax1
QLD
4937 posts
QLD, 4937 posts
20 Oct 2020 7:50pm
Yep , good idea.
Mark _australia
Mark _australia
WA
23647 posts
WA, 23647 posts
21 Oct 2020 7:36am
I reckon great idea, Sikaflex and a bit of PVC tube would last forever
Ben1973
Ben1973
1008 posts
1008 posts
21 Oct 2020 8:01am
You can get some pretty tough Sticky tape these days, might be easier than glueing a pipe on.
MobZ
MobZ
NSW
534 posts
NSW, 534 posts
21 Oct 2020 7:46pm
Thanks for the replies.

Ben, yes i considered tape, but tape is kind of rigid and i would assume it would be hard to get it to grab around a corner, and over the thick stitching on the bottom edge.

I guess it's not a bad idea then.
yeeha.

I will post a pic when i get it out soon.

cheers.
Imax1
Imax1
QLD
4937 posts
QLD, 4937 posts
21 Oct 2020 7:06pm
Must post pics , it's seabreeze law .
seanhogan
seanhogan
QLD
3424 posts
QLD, 3424 posts
21 Oct 2020 7:59pm
^+1 and with lawn !
Ben1973
Ben1973
1008 posts
1008 posts
22 Oct 2020 6:47am
I did a fairly major emergency repair to one of my sails with clear duct tape, it was over stitching and around an edge. It's now become permanent as I couldnt get it off when I went to do the job properly. Just make sure it's dry, press it down really hard ( I used a small roller) and don't use it for a couple of days.
if it's a structural area I've found monofilm can slide Under the tape so the gap gets a bit wider Along the tear but you won't need to worry about that for what your doing.
oscardog
oscardog
216 posts
216 posts
22 Oct 2020 9:21am
Ben1973 said..
You can get some pretty tough Sticky tape these days, might be easier than glueing a pipe on.


Gorilla tape
Shifu
Shifu
QLD
1997 posts
QLD, 1997 posts
22 Oct 2020 8:54pm
seanhogan said..
^+1 and with lawn !


Haven't seen any hot lawn pics in a while...
MobZ
MobZ
NSW
534 posts
NSW, 534 posts
22 Oct 2020 10:45pm
Shifu said..

seanhogan said..
^+1 and with lawn !



Haven't seen any hot lawn pics in a while...

I took this photo today of board I found under the house...

Lawn is too dressed, it's coming back. Spongy though.
unlike this board, that is definitely not spongy.
What is it? Should I try sailing it? The board. Not the lawn different thread that would be I guess.
I will take photo when attacking the sail with hose repair, and most likely a different lawn too.




olskool
olskool
QLD
2462 posts
QLD, 2462 posts
23 Oct 2020 3:09am
Mate thats a SPEED Raceboard from the 90s. Nice bit of kit!! Thatll be easy enough to get the basics down pat n still have a good turn of speed once youre proficient. Have clocked 28kts on mine.
Sandman1221
Sandman1221
2776 posts
2776 posts
23 Oct 2020 3:46am
second gorrilla tape, black or clear, have used the clear to repair a small cut in the X-ply, and the black to protect the bottom edge and side of the sail where it rubs on the deck when tacking/uphauling, mostly 9.0 sail issue.
Imax1
Imax1
QLD
4937 posts
QLD, 4937 posts
23 Oct 2020 6:27am
That's close to lawn porn . Oldie would think the board is porn . I think he has a pic of one above his work bench.
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅