Recently purchased DP F-Race 130 for light winds up to 20 knots. The fin box is a deep Tuttle box. Historically, I have used MFC Liquid Pro as my go to fin of choice for open water riding. Plan to use 7.5m sail. Any guidance on fin selection and length would be appreciated.
the states
Gregg

F-race looks like a detuned and more user friendly slalom board, so designed to go fast in a straight line. I would probably get a straight fin, rather than a curved one. Regarding the size the basic formula is: Fins size = Sail size x 5 + 4. So in your case probably around 41-42

I have a Severne Fox, which is I think is similar freerace kins of a board. I have used it with three different fins all same size. The Liquid pro did not feel great - the board was too lively, kept spinning out, the stock straight fin was better, but I still wasn't happy, so ended up getting a Tribal Powermax - it was by far the best one out of the three

I use Tribal carbons in my Patrik FRace & slalom boards. 44 is mint in 150litre and up to 38 in 110 board. Although the patrik 36 race fin was cheap and surprisingly good. Look on the patrik site and there is are a few guide for fins & sail size for given sizes. Tribal also have fin guides for width & volume.

Thank you for sharing your experiences and personal preferences on fin selection and size for me to consider on the DP F-Race 130.
Very much aprreciated.
Gregg Anshus

I weigh 86 kg. What size fin would you recommend with a 7.5m cambered sail on the DP F-race 130? I like the ability to load up the back foot and point high into the wind when going up the coastline.
Thanks
Gregg