New Board Breaks On Third Wave - Do I have any recourse.

8 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
johnsm
johnsm
5 posts
5 posts
7 Jul 2017 2:50pm
Hi I purchased a new Long Board ($1200) from a leading Sydney retailer. On the third ride (2-3ft wave) a crack developed and the board snapped underneath me.
I did not hit anything or the bottom. I was mid wave and it collapsed underneath me.
The retailer and manufactuer basically said it happens and bad luck.
They offered to sell me the same board again for $800.
Do I have any recourse?
DARTH
DARTH
WA
3028 posts
WA, 3028 posts
7 Jul 2017 2:56pm
Any pics of the board?
Ricardo1709
Ricardo1709
NSW
1302 posts
NSW, 1302 posts
7 Jul 2017 5:56pm
Might be a leading retailer but was the board from a leading shaper or a cheap Thai stick, if its from a reputable shaper they will probably come to some arrangement as they'll want to protect their name as a craftsman but if its a board pumped out overseas you can probably kiss your bucks goodbye in which case spit the dummy at the retailers and demand a refund.very disappointing for you.Best to buy from a shaper not a shop
Ctngoodvibes
Ctngoodvibes
WA
1404 posts
WA, 1404 posts
7 Jul 2017 4:02pm
400 bucks a wave bummer
Razzonater
Razzonater
2224 posts
2224 posts
7 Jul 2017 4:27pm
Please read my below blanks rant on other thread........
Yes and no
Yes if it was a big name board from reputable shaper...
Most likely a no as proving to the supplier that you did not go top to bottom on a triple overhead closeout is impossible.....
A firm and emotive yet eloquent letter with additional photos and red arrows pointing to suspect snap point is always a good start, phone calls are gone away as soo n as supplier (generally 17 year old kid running front desk on 18 dollars an hour) has hung up and they return to their yoga monthly magazine whilst drinking the soy latte with the 17 year old girl in the retail section of said shop
GusD
GusD
NSW
79 posts
NSW, 79 posts
7 Jul 2017 10:46pm
a crack developed and the board snapped underneath me


From a legal perspective, sort your story out first before you start trying to recover anything from the manufacturer/shaper
GusD
GusD
NSW
79 posts
NSW, 79 posts
7 Jul 2017 10:47pm
Nonetheless sorry for your loss, that really sucks
JESUSGUS
JESUSGUS
WA
174 posts
WA, 174 posts
8 Jul 2017 7:38am
Persistence is the key. Keep at them and try to go above the line manager. Use their social media to air your concerns
johnsm
johnsm
5 posts
5 posts
8 Jul 2017 9:12am
GusD said..

a crack developed and the board snapped underneath me



From a legal perspective, sort your story out first before you start trying to recover anything from the manufacturer/shaper


Thank you for all your replies.
Gus what do you mean? I was on a small 2-3ft full wave in deep water. The wave hadn't broken. Didn't hit anything. I could see the board break underneath my feet. It wasn't in an instant it took half a second.
If I post pictures here it would easily identify the board to most of you. Would I have to worry about my legal standpoint if I did so?
It was a custom made, top of the line Aussie Board. I understand the hazards of surfing and boards aren't guaranteed. However any product should last more than 3 rides on a small day without incident.

So I guess in summary your collective advise is:-
1). Another call to the retailer.
2). Another call to the manufacturer.
3). Letter to retailer/manufacturer.
4).Post to retailers and manufacturer social media sites.
5). Letter of demand.
6). Contact Fair Trading.
7). Get my story right from a legal standpoint.

Ctngoodvibes
Ctngoodvibes
WA
1404 posts
WA, 1404 posts
8 Jul 2017 1:30pm
Out of interest - was it epoxy or PU?
Legion
Legion
WA
2222 posts
WA, 2222 posts
8 Jul 2017 3:51pm
If the retailer and manufacturer are two different entities then it's a weird "custom". If you're not dealing directly with the shaper then that's not how I'd want to order a custom.
DEL
DEL
QLD
16 posts
DEL DEL
QLD, 16 posts
21 Jul 2017 8:45am
hi guys as a board maker i have been through this before.
the first thing i do is get the board back and check out to see if it was our fault ie sanding or glassing.
if it is we replace it,as all good board makers can pick this up straight away, but 95% of the time it is not a manufacturing issue.
i have had guys come in and say they did it duck diving or bottom turning, and then a few days later a customer comes in and sees there board and then tells us the truth that they watched them go over the falls and get smashed.
so its a hard one but the manufacturer should at least have a look at it.

PelicanPete
PelicanPete
QLD
67 posts
QLD, 67 posts
28 Jul 2017 1:16pm
Home Insurance.
Blew off the top of the car when the tiedown broke or let go.
Prawnhead
Prawnhead
NSW
1317 posts
NSW, 1317 posts
28 Jul 2017 7:03pm
If you saw the crack develop it would have to have been on the deck? or did it crevass through from the bottom.....? Let's see some photos?
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅