How to get water out os epoxy boards

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
cripple
cripple
WA
21 posts
WA, 21 posts
26 Mar 2013 10:16pm
Does anyone know first hand how to get water out of epoxy boards?

Does the water pool under the ding or disperse through out the board due to the open cell nature of the blank.

I have heard of:
Pulling out the vent plug and pressurizing the board to about 5psi.
Heating up the ding with an open flame. No thanks!
Centrifuge and drilling a hole at each end. My Board is 9'11". Love to see it done!

I suspect it has been sucking small amounts of water over a long period.

Interested to hear your thoughts.
smicko
smicko
WA
2503 posts
WA, 2503 posts
26 Mar 2013 11:37pm
Drill a 3/8 hole in the lowest point, stand it upright for a coupla days then plug it.
Mark _australia
Mark _australia
WA
23647 posts
WA, 23647 posts
27 Mar 2013 8:21am
smicko said...
Drill a 3/8 hole in the lowest point, stand it upright for a coupla days then plug it.



Yes
Except make that a month not couple of days, it does disperse well.

you will never get it all out unless blowing warm dried air from one end to the other ata VERY low pressure /flow (easy to pop a board).

Search for the threads here in windsurf forum it comes up again and again
mocha1
mocha1
WA
934 posts
WA, 934 posts
27 Mar 2013 10:12am
water p155es out of epoxies if you leave them as smicko says but in a warm environment. I put mine in the sun for a bit they get real hot - but some might delaminate - havnt had this problem myself

always know when ive got a hole somewhere in my boards, the trip back from wherever with board in bag on roof - boardbag ends up saturated - or coming home from overseas - pressure in cargo bay forces water out and same result for boardbag.
CRF
CRF
WA
82 posts
CRF CRF
WA, 82 posts
27 Mar 2013 10:42am
you can also use a small fish tank pump set on a very low pull and leave for a couple of days in a warm dry environment, with value open. Pump sucks out air + water and draws in warm dry air
CRF
CRF
WA
82 posts
CRF CRF
WA, 82 posts
27 Mar 2013 10:44am
suction has a low risk than pumping air from the other end - less chance of delam as it can be controlled better
jbshack
jbshack
WA
6913 posts
WA, 6913 posts
27 Mar 2013 11:24am
Sorry to thread steal but i didn't want to start another for a simple question.

My Sweet Potato has a small mark on the rail (from kids dropping it) i can feel it but there is no crack as such, do i need to get that fixed
doggie
doggie
WA
15849 posts
WA, 15849 posts
27 Mar 2013 11:25am
jbshack said...
Sorry to thread steal but i didn't want to start another for a simple question.

My Sweet Potato has a small mark on the rail (from kids dropping it) i can feel it but there is no crack as such, do i need to get that fixed


Do you think its water proof?
Buster fin
Buster fin
WA
2598 posts
WA, 2598 posts
27 Mar 2013 3:20pm
jbshack said...
Sorry to thread steal but i didn't want to start another for a simple question.

My Sweet Potato has a small mark on the rail (from kids dropping it) i can feel it but there is no crack as such, do i need to get that fixed


Fixed? Yes.
But get it fixed? No.
jbshack
jbshack
WA
6913 posts
WA, 6913 posts
27 Mar 2013 8:34pm
doggie said...
jbshack said...
Sorry to thread steal but i didn't want to start another for a simple question.

My Sweet Potato has a small mark on the rail (from kids dropping it) i can feel it but there is no crack as such, do i need to get that fixed


Do you think its water proof?


Yeah i think it would be WP. But i just wasn't sure. Its more a light crazed look than actual damage..I may still get it looked at..
cripple
cripple
WA
21 posts
WA, 21 posts
27 Mar 2013 10:11pm
Thanks to the guys who had some useful suggestions, they are appreciated.

To the tread stealer that asked a question he knew the answer to. I think you have surfed my wave before "drop in boy".
Ctngoodvibes
Ctngoodvibes
WA
1404 posts
WA, 1404 posts
28 Mar 2013 7:35am
I'd avoid buying an epoxy to begin with [}:)]
jbshack
jbshack
WA
6913 posts
WA, 6913 posts
28 Mar 2013 11:12am
cripple said...
Thanks to the guys who had some useful suggestions, they are appreciated.

To the tread stealer that asked a question he knew the answer to. I think you have surfed my wave before "drop in boy".


YOUR wave

Cant say i surfed with a Kneelo in a while
doggie
doggie
WA
15849 posts
WA, 15849 posts
28 Mar 2013 11:57am
jbshack said...
cripple said...
Thanks to the guys who had some useful suggestions, they are appreciated.

To the tread stealer that asked a question he knew the answer to. I think you have surfed my wave before "drop in boy".


YOUR wave

Cant say i surfed with a Kneelo in a while


Sounds like you guys are talking about "MY" wave
jbshack
jbshack
WA
6913 posts
WA, 6913 posts
28 Mar 2013 2:15pm
doggie said...
jbshack said...
cripple said...
Thanks to the guys who had some useful suggestions, they are appreciated.

To the tread stealer that asked a question he knew the answer to. I think you have surfed my wave before "drop in boy".


YOUR wave

Cant say i surfed with a Kneelo in a while


Sounds like you guys are talking about "MY" wave


I have no idea what we are talking about
doggie
doggie
WA
15849 posts
WA, 15849 posts
28 Mar 2013 2:27pm
jbshack said...
doggie said...
jbshack said...
cripple said...
Thanks to the guys who had some useful suggestions, they are appreciated.

To the tread stealer that asked a question he knew the answer to. I think you have surfed my wave before "drop in boy".


YOUR wave

Cant say i surfed with a Kneelo in a while


Sounds like you guys are talking about "MY" wave


I have no idea what we are talking about


Did you say somthing JB??
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅