Nice work on the Nano - I would not mind doing on of those myself. Need to find one to play with first though

Do you glass them yrself?

Hi Ted. Yes I will glass them myself too. Only got a single car garage so the shaping bay is also my glassine and sanding bay. So this time I'm doing a mini production run to reduce the number of times I have to clean up.
I've now of 3 boards ready to glass. (Just finished one then and will post pics soon)
Got 2 more to go unless I get any more orders.
One will be a 7'8 mini mal and the other. A 6'9 single prolly channel bottom but not decided just yet.

Thanks for the kind words Darth! That bord just seamed to fit perfectly into that blank and made it so easy to shape!! It looks like it needs a single fin box in it

This will be a 6'9.5x20 . Will see but very likely a 6 channel single with quad option.

Hey Shunter

I used a burford 6'4 EN blank. but i didnt quite get the full amount of rocker into it.

The board was supposed to be :
5'9 x 19 3/4 x 2 5/8. Nose at 12" 15 3/8" tail 15 1/4". Nose rocker is 3 15/16" and tail is 2 1/8".
Wide point is 4" forward of center and tail block (ie before rounding) was 10" or maybe slightly more.
ended up more like 5'9x20x2 3/4. Nose rocker ended up as about 3 3/4" tail about 2".
I ran single concave all the way through, with max depth at about the apex of the rocker which lined up almost with the wide point. concave about 4mm max i think. rocker values are after concave cut.

yes shoodbegood it is all about the lights! i'd never be close to symetrical without them!!!

Been doing more recently!

my 6'9 6 channel single

Kims 6'3x21.5x3"



Miks 7'5x22x3"



Today I'll begin cleaning the shed up and start glassing the 6 boards I've got lined up and waiting!!!

beerdead said...
Now you're talking!!

Have fun glassing and sanding....looks super sweet!!