Steel Van de Stadt

8 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Ramona
Ramona
NSW
7752 posts
NSW, 7752 posts
21 Aug 2017 8:07am
34 foot steel project that may appeal to a welding enthusiast.

http://www.ebay.com.au/itm/VanDeStadt-391-steel-34-foot-yacht/172821307938?hash=item283cf3e222%3Ag%3A030AAOSwkr5Zkpam
cisco
cisco
QLD
12365 posts
QLD, 12365 posts
21 Aug 2017 8:22am
That one is worse than the one I had and I sold it for $300. Mine had a good rig on it and sails as well.

I think once the rust gets into a steel yacht it is just about a write off.
sydchris
sydchris
NSW
387 posts
NSW, 387 posts
21 Aug 2017 8:42am
Big project although not quite as big as this one:


Ramona
Ramona
NSW
7752 posts
NSW, 7752 posts
21 Aug 2017 9:03am
cisco said..
That one is worse than the one I had and I sold it for $300. Mine had a good rig on it and sails as well.

I think once the rust gets into a steel yacht it is just about a write off.


The stove is worth $500! The engine is a bit big but good value.
Futurecruiser
Futurecruiser
VIC
119 posts
VIC, 119 posts
21 Aug 2017 4:07pm
Bloody hell thats a bit of a sad sight. Would almost cough up for some spare parts if I had somewhere to put it, probably lucky I don't.
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
21 Aug 2017 6:57pm
The Sydney mooring minder audit...
woko
woko
NSW
1792 posts
NSW, 1792 posts
21 Aug 2017 10:47pm
Alas nothing is forever ! Wood is good, steel is better, but bog is best !
waikikin
waikikin
NSW
51 posts
NSW, 51 posts
24 Aug 2017 8:14pm
I was a bidder, should be ok at the money...
Haven't looked in person yet but might just for interest.
I built one in 86, great boats.
Jeff.
waikikin
waikikin
NSW
51 posts
NSW, 51 posts
24 Aug 2017 8:16pm
sydchris said..
Big project although not quite as big as this one:




Pretty sure this one is/was close to where I grew up between Oyster bay & Como beside the old Como tip/Carina Creek.
Bruski068
Bruski068
VIC
457 posts
VIC, 457 posts
25 Aug 2017 11:17am
woko said..
Alas nothing is forever ! Wood is good, steel is better, but bog is best !


Fibreglass must come pretty close though easy to fix cracks, or cut out and replace sections.
cisco
cisco
QLD
12365 posts
QLD, 12365 posts
25 Aug 2017 11:07pm
Bruski068 said..
Fibreglass must come pretty close though easy to fix cracks, or cut out and replace sections.


As has been discussed before, nobody yet knows what the service life of fibreglass is.
You can break it and you can burn it and you can repair it. Apart from that, it seems to last forever.

Pretty much makes it the ideal boat building material.
waikikin
waikikin
NSW
51 posts
NSW, 51 posts
27 Aug 2017 10:17am
Price is on the slow rise. I'd inquired about inspection but seller replied not being able to help more(?) in regards to this so on that basis I'm out on it. Could potentially be a great boat with some straight forward refab on sections but without internal inspection risk is great. Makes me wonder if it's some kind of forced sale/settlement issue or worse that the owner might be injured.
Jeff
Ramona
Ramona
NSW
7752 posts
NSW, 7752 posts
27 Aug 2017 5:48pm
waikikin said..
Price is on the slow rise. I'd inquired about inspection but seller replied not being able to help more(?) in regards to this so on that basis I'm out on it. Could potentially be a great boat with some straight forward refab on sections but without internal inspection risk is great. Makes me wonder if it's some kind of forced sale/settlement issue or worse that the owner might be injured.
Jeff


Fair bit of money required for a rig. So far the bidding is up to about half what the folding prop cost, 6 grands worth of lead, good freshwater cooled diesel. That gas oven is worth heaps. One of the fairest steel hulls I have seen. The steel repairs wont be that bad and no worst than all those other steel boats about.
waikikin
waikikin
NSW
51 posts
NSW, 51 posts
30 Aug 2017 5:55pm
Ramona said..

waikikin said..
Price is on the slow rise. I'd inquired about inspection but seller replied not being able to help more(?) in regards to this so on that basis I'm out on it. Could potentially be a great boat with some straight forward refab on sections but without internal inspection risk is great. Makes me wonder if it's some kind of forced sale/settlement issue or worse that the owner might be injured.
Jeff



Fair bit of money required for a rig. So far the bidding is up to about half what the folding prop cost, 6 grands worth of lead, good freshwater cooled diesel. That gas oven is worth heaps. One of the fairest steel hulls I have seen. The steel repairs wont be that bad and no worst than all those other steel boats about.


True, steel repairs to that VDS would be pretty straight forward, I built one in 85-86. Would have wrecked out of too but too many projects, one of my boys was half keen but woul still be work for me. Hope somebody got a deal on it all the same, shame for the owner/builder that it came to that.
Jeff.
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅