Hi

Does anyone know a good shipwright etc that can replace windows in the modern way, ie using 3M tape etc.

I have contemplated doing this job myself but we have moved our boat to Drummoyne and I don't have access to a jetty with power etc anymore.

Boat is a Northshore 27.

Steve Jobs.....

southace said..
Did you end up finishing them portholes HO2?

they work a treat South Ace great in any weather except when its raining

Knowing whats involve I wont be doing that again Ill probably do the front hatch next year though.
Dr Rog when he was down commented on a chip out of the gel coat I had under my original hatch where water sits at anchor .
I've sealed it up since but will tidy it up next year





So the plan will be fill in the lip between the inner and outer lip and add a Lewmar opening hatch or some thing sinilar

U need to fit one of these forward facing!

why wouldn't you use fixtech keensailor they do a sealent for acrilic plastics?

Guitz said..
Steve Jobs.....

He don't know nuffink about windoze ..... does he?

I had Gebo hatches which leaked where the extrusion is butted together and I replaced them with Moonlight hatches which have the extrusion welded. There are no more leaks, but the handles don't appear to be the strongest ones I've seen around.

When removing the Gebo hatches, they were virtually destroyed as the sealant used was hard to break. If I had my time again I would bed the new hatches down with a mastic that never goes hard so that the hatches could be easily removed if needed. I also use Fixtech for nearly everything but I know that if I had of used it on my hatches, they would never be coming off again in the same shape they went on. So if you do use Fixtech (or something similar) make sure you do a very good job as there will be no chance of a second attempt at the job. Skinny aluminium extrusions do not like being levered off.

keensailor said..
Hi

Does anyone know a good shipwright etc that can replace windows in the modern way, ie using 3M tape etc.

I have contemplated doing this job myself but we have moved our boat to Drummoyne and I don't have access to a jetty with power etc anymore.

Boat is a Northshore 27.

I did mine with tape and goop on a mooring. Was a difficult job that took 2 hours per window to install with my wife helping plus removing and preparation time. If you have 4 windows I'd think you'd be looking at 10+ hours plus materials even if you could find someone who could do it (I don't know who would).

But yes, it's a hassle of a job, Keen. My write up - http://www.adventuresinbob.com/2013-spring-project-3-therapy-for-the-crazed/

I think I have a tube of goop hanging around if you want it. I bought it through these guys - next day delivery: au.rs-online.com/web/p/silicone-sealants/0113092/