Not quite that bad Sam. But it did rain pretty hard at Church Point. According to quays.pittwaterweather.com/index.php there was 47mm on 14 March at The Quays Marina. That's a good website to look BTW at if you want to know the conditions on Pittwater.

Plenty of the dinghies on tidal 'moorings' on the east side of Church Point are getting close to being brim full.

Mine is OK though. Thanks for asking.

I'm on board at the moment to see how she fared.

Only a little bit of dampness in one of the bulkheads. Nothing compared to how it used to gush in. It's still getting in through a couple of bolts on the galley window but once I fix that it should be all good. I've put a lot of effort into stopping these little annoyances over the last 12 months so I'm pretty chuffed actually.

They are definitely a risk, Yara and dinghies come and go. And any mooring tackle around the low water mark or deeper is promptly removed by RMS.
Still raining BTW. Have you checked your cockpit drains yet Sam?

Gravy7 said..
They are definitely a risk, Yara and dinghies come and go. And any mooring tackle around the low water mark or deeper is promptly removed by RMS.
Still raining BTW. Have you checked your cockpit drains yet Sam?

So if you have a dinghy with a mooring below the high water mark , but above the low tide mark, you are not covered by either Council or RMS?

samsturdy said..

Gravy7 said..
Still raining BTW. Have you checked your cockpit drains yet Sam?

No Mate and it looks like I'll have to wait a little bit too, I've got a trip to 'orse piddle tomorrow for a couple of days so
we'll see how I pull up over the next week to get down to the boat.

Sorry to hear that Sam. Hope you and the horse recover soon.

Thought you might be worried about the boat so I went for a little row before it got dark. She seems ship shape and Bristol fashion. Cockpit drains are clear and doing a fine job.

A related question on the rain, currently copping a bit coming up the south coast... The place I am having trouble with leaks is when the water starts to pool on top of the dodger and drips through it right into the storm boards/companionway. Not the worst, but the porous dodger is also a bit annoying when under it trying to get out of the rain. I'm skeptical of these products but has anyone tried any of the waterproofing sprays out there on a dodger? Interested in any views one way or the other if so. I'm not sure exactly what the dodger is made of, seems to be a pretty basic canvas type material.

Futurecruiser said..
A related question on the rain, currently copping a bit coming up the south coast... The place I am having trouble with leaks is when the water starts to pool on top of the dodger and drips through it right into the storm boards/companionway. Not the worst, but the porous dodger is also a bit annoying when under it trying to get out of the rain. I'm skeptical of these products but has anyone tried any of the waterproofing sprays out there on a dodger? Interested in any views one way or the other if so. I'm not sure exactly what the dodger is made of, seems to be a pretty basic canvas type material.

I don't think any spray has the ability to seal material properly, maybe a oilskin/driazabone wax and blow it in with a hair drier. But I guess it depends on the material, you might end up with a greasey mess

Futurecruiser said..
Yeah cheers, thanks for the reports. Now that I'm getting to some warmer climes I'm more inclined to put up with it than risk making a mess of the dodger.

I would take it home and give it a good soak in fresh water with a couple of rinses , and dry thoroughly. Then 3 coats of a good waterproofing spray.

No worries. Just hope its not your drinking arm, Sam.

I pulled up this thread while searching for recommendations for waterproofing my dodger.
I waterproofed my Bimini over 12 months ago with this:
www.whitworths.com.au/starbrite-waterproofing-fabric-treatment-3-7l and it has performed very well.
BUT, it costs an arm and leg ($120 for 3.7ltr), especially when it took at least 2.5 ltr to do the job. However, some mightn't mind the cost for something that works well.
For me though, I figure there must be a product that will do the same job at a more competitive price.

'regards to all,
allan