Kite wrapped in mast at St Kilda

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
J3184
J3184
VIC
1 posts
VIC, 1 posts
10 Feb 2016 1:51am
For those at St Kilda Marina yesterday (Mon 9th Feb) you may have seen a guy get his kite tangled in the mast of a moored yacht.

He was rescued by another kiter to bring him back to shore after some time trying to untangle the kite and bring it down.

The kite is still there. Fortunately the RMYC and yacht owner have been very understanding and helpful in the matter.

The primary concern is the safety of the vessel, anyone nearby and the environment in the event the kite comes loose.

Please note that attempts will be made to remove the kite this week. Please do not try to assist in the meantime due to liability / insurance reasons.

All the accessible lines have been slashed and the kite deflated in order to let it stream out and not catch wind.

If you notice the kite becoming particularly dangerous in the coming days - please message me.

Loftywinds
Loftywinds
QLD
2060 posts
QLD, 2060 posts
10 Feb 2016 12:52pm
J3184 said..

The primary concern is the safety of the vessel, anyone nearby and the environment in the event the kite comes loose.




I hope you didn't mean in that order! :P
Smithy
Smithy
VIC
859 posts
VIC, 859 posts
10 Feb 2016 10:56pm
Cmon fess up, are you "the guy" J3184 ??
SaltySinus
SaltySinus
VIC
960 posts
VIC, 960 posts
11 Feb 2016 10:12am
Smithy, ... I think you're being unnecessarily suspicious. Just because "J"'s favorite sport is: "St Kilda Marina" doesn't mean he set the profile up just to ask for his kite back ;-)



But a timely reminder that the Marina often has pretty dirty / gusty air.. best to keep clear if you can or give the boats a wide berth of you can't.
RAL INN
RAL INN
SA
2897 posts
SA, 2897 posts
13 Feb 2016 3:54pm


Seems that Powerlines and Trees are not enough.
Cabrinha's have added Yacht rigging to the list.
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅