Should I replace these lines?

5 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
patkite
patkite
WA
10 posts
WA, 10 posts
29 Jul 2020 2:50am
Hi everyone!
These are pics of my North 2017 click bar lines.
As you can see, there are some threads coming out right from the attachment knot point of 2 lines.
I was wondering if I should be concerned and replace it?
Cheers







Gilly3
Gilly3
QLD
800 posts
QLD, 800 posts
29 Jul 2020 7:24am
A Freyed knot!!

It will be fine....re splice it if ur worried....
NorthernKitesAUS
NorthernKitesAUS
QLD
1084 posts
QLD, 1084 posts
29 Jul 2020 9:43am
yes mate. Replace, replace, replace!
But you need to find out why and get to the source of the problem. I've heard Click bars are renowned for this, for some (t)reason.
Hardcarve1
Hardcarve1
QLD
550 posts
QLD, 550 posts
29 Jul 2020 10:25am
Steering lines or main power lines.
Gazuki
Gazuki
WA
1363 posts
WA, 1363 posts
29 Jul 2020 9:01am
Best way to test it is to go out and loop your kite, if it doesn't snap then it should be ok.
KPSS Used
KPSS Used
NSW
438 posts
NSW, 438 posts
29 Jul 2020 11:21am
patkite said..
Hi everyone!
These are pics of my North 2017 click bar lines.
As you can see, there are some threads coming out right from the attachment knot point of 2 lines.
I was wondering if I should be concerned and replace it?
Cheers










Looks like the tail of a splice. The photo of the line (on back of your well seasoned hand) appears to be sewn to the left side of the image. If thats the case its fine its just the the end of the line that is spliced inside was a bit long and its creeped out of the weave - nothing to worry about.
Puetz
Puetz
NT
2186 posts
NT, 2186 posts
29 Jul 2020 7:49pm
... duuuuude,,,,,absolutely replace them! Don't muck around, don't risk it.

Mine snapped in exactly the same place and they looked very much like yours ,,,,, if in doubt, it means there is no doubt, its' time to replace'em!

As they say, "a stitch in time saves.... nine".

Good luck,

Robbie

weebitbreezy
weebitbreezy
635 posts
635 posts
29 Jul 2020 6:33pm
If you need to ask the question...

As above cut them down and re-splice if you want to save a bit of money - a loss of 30cm isn't going to be noticeable - just change the pigtails on the end to account for the difference. For a 2017 bar I'm guessing its had a fair few sessions on the lines so you are delaying things but if the rest of the lines are fine then you can probably get by a bit longer safely on that set*

(* I'm assuming that you aren't being daft and going out in 50 knots trying to emulate Len10 as he is only going to be taking out kites and lines with a few hours use on them)
Kamikuza
Kamikuza
QLD
6493 posts
QLD, 6493 posts
29 Jul 2020 9:17pm
Second photo looks like threads from the tail of the splice is poking out, but the top photo looks a worse, like the tail of the bury has been square cut and is starting to destroy the line.

I'd replace them if my life depended on them, but I wouldn't if I was just cruising around...
KiteAddicted
KiteAddicted
67 posts
67 posts
30 Jul 2020 1:00am
I'd take it too the local kite repair shop and get a professional to confirm. Most likely do it for free and you have real peace of mind. Saves cutting unnecessarily or doing a procedure you may have never done before.
psychojoe
psychojoe
WA
2241 posts
WA, 2241 posts
30 Jul 2020 4:28am
I can't pretend to know about lines, but I can tell you mine were about the same age when the front line snapped which made the self rescue time consuming and a little difficult
Phoney
Phoney
NSW
608 posts
NSW, 608 posts
30 Jul 2020 3:42pm
I've had a couple of lines snap while kiting. It's no big deal, just an inconvience of having to self-rescue.

Snapping while standing on the beach could be dangerous I guess...
Kamikuza
Kamikuza
QLD
6493 posts
QLD, 6493 posts
30 Jul 2020 9:12pm
Phoney said..
I've had a couple of lines snap while kiting. It's no big deal, just an inconvience of having to self-rescue.

Snapping while standing on the beach could be dangerous I guess...


Mostly they snap as you're loading it up and the whole kite and bar get ripped out of my hands ... but one of the last ones was right at the peak of a jump and cost me a broken board
SaveTheWhales
SaveTheWhales
WA
1908 posts
WA, 1908 posts
31 Jul 2020 7:34am
Great news - you've got 3 lines too many !

Remember how much fun you had with 1 line




cauncy
cauncy
WA
8407 posts
WA, 8407 posts
31 Jul 2020 8:38pm
Adds to the excitement, keep them
Plummet
Plummet
4862 posts
4862 posts
1 Aug 2020 1:13am
I have a couple of bars. One with old worn lines for light wind close to shore stuff. The other a good condition storm kiting line set.
I would relegate these lines to the old worn line bar for not critical stuff.
Chris_M
Chris_M
2132 posts
2132 posts
2 Aug 2020 5:58pm
I suppose you need to weigh up the cost of new lines vs your desire to have trust in your equipment.

I personally am not a massive fan of having something that bothers me about the durability of my equipment, because when things go wrong, it's often at the worst time
flano
flano
WA
113 posts
WA, 113 posts
6 Aug 2020 5:17pm
I snapped a frayed centre line right next to the splice during the westerly winds in Sydney this week. The lines were in good condition apart from the one frayed section (80% intact) so i rolled the dice... I was out all day with no issues having an epic time until i got slammed by a large gust causing the frayed line to snap. Once it snapped the kite started looping out of control untill i hit the quick release. Luckily my tether line was still in tact and i didn't loose my kite to the bay. As i was close enough to the beach there was not to much of an inconvenience sorting my **** out. For only ~$250 you can get a new set of lines and i would highly recommend it as the cost of potentially loosing a board / kite or putting someone else out to drag your wet kit in is not worth it.

Don't be a tight ass like me.
Kamikuza
Kamikuza
QLD
6493 posts
QLD, 6493 posts
6 Aug 2020 8:34pm
flano said..
Luckily my tether line was still in tact


I had that line snap. Single front line safety, I've never been a fan. Tempted to put an O-S handle on the other front line...
Puetz
Puetz
NT
2186 posts
NT, 2186 posts
7 Aug 2020 11:30am
Chris_M said..
I suppose you need to weigh up the cost of new lines vs your desire to have trust in your equipment.

I personally am not a massive fan of having something that bothers me about the durability of my equipment, because when things go wrong, it's often at the worst time


... absolutely,,,, and damn right they'll break at the worst time,,, guaranteed!

Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅